Having a metal roof is becoming a common thing for people in the United States. It is because of modern aesthetics and the long-lasting assurance of this roof type. However, many people search for DIY methods to install a metal roof on their own.
Are you one of those who are interested in this type of guide? You have landed on the right blog, as we will help you learn the whole process in 6 steps. We have researched a lot and shared the steps to summarize the whole process. Let’s get started and read more about this practical topic!
Before we go to the actual process to learn how to install a metal roof, we suggest you have particular products in your access. Without having them, you may not be ready to take further steps and install this roof at your place.
Here, we have made a list of all those materials, tools, and products that you need throughout this installation. You must consider having them in your access to use them whenever it is required.
· Steel Roofing Panels
· Synthetic or Felt Underlayment
· Furring Strips
· Roofing Screws
· Roofing Washer
· Flashing Caps
· Butyl Tape
· Screw Gun
· Chalk Line
· Measuring Tape
· Safety Products
We hope you have all the above-mentioned products and are ready to get started. Keep in mind that you need to follow the upcoming steps in the same sequence to install a metal roof easily.
The very first step that you have to take is the preparation of the roof deck. You should inspect the deck for warping and loose boards. Keep in mind that you have to get a clean and solid surface to install a metal roof.
Along with this, you have to inspect the roof pitch properly to ensure your safety. Mostly, roofs have a slope ratio of 3:12, which is effective for water drainage and your safety while cleaning. However, if your roof is steeper than this, we recommend that you get professionals from a reputable company like Abraham Roofing.
Keeping the space between the roof deck and steel panels is compulsory for durability. This is where you will find the installation of underlayment essential. For metal roof installation, you must choose synthetic or felt underlayment.
To install it properly, you should roll it horizontally and start from the eaves. You have to overlap every row with at least 4 inches and fix it with a cap nail. With this, you will avoid the displacement of the underlayment as well as the metal roof that you are going to install.
The hardest task for metal roof installation is the fixing of the first steel roof panel. You need to be careful because this step needs extra precision. It will decide the fixing and alignment of the rest panels.
You can get started by snapping a chalk line as a reference point to follow for this installation. It will help you install the first panel and then move ahead with the fixing of the remaining ones. To ensure proper water drainage, we recommend that you align the bottom edge of the panel with the eave by about 1 inch.
Once you are done with the installation or fixture of the steel roof panels, you need to move ahead to secure them. For this purpose, you need to use fasteners properly. You have to use the screw gun and other related tools for the proper insertion of screws in the metal roof.
It is recommended to insert the screws on the flat sections with a short space. You can keep the distance between screws of about 18 to 24 inches. You can also decrease the distance to enhance the durability of this fixture.
These caps must be installed on your metal roof to avoid problems like water damage. Flashing caps will help you fill the joints where water can enter. To avoid any such issues, it is recommended to install them under the panel edge and fasten them strongly.
The last step you need to take to install a metal roof is to inspect it. You should re-check all the results from the steps that you have performed for this installation. In this process, you must remove debris or leftover materials from the roof surface.
They may seem harmless at that time, but they can create issues in the future by blocking water drainage. Therefore, it is recommended to inspect the roof thoroughly and clean it properly.
Undoubtedly, you have learned how to install a metal roof from the above sections. However, it is recommended to get high-quality professional roofing services from Abraham Roofing. Our professionals will help you get this roof installed without making any mistakes.
We will take care of every minor thing, from installing the first panel precisely to fitting the flashing caps. Our roofers will also ensure that the roof is cleaned to clear any debris and leftover materials to avoid any future problems. Call us today to schedule the installation!
In this blog, we have shared the most suitable and essential steps to learn how to install a metal roof. We have briefly described every step to let you understand why they are essential to follow.
Now, you can install this roof at your place on your own by following these DIY steps. However, you can also call us at Abraham Roofing to get professional roofers to do the job with precision.